When it comes to lids, liners and caps. Check the part number at 3M to find out what it should and the piece count too. I have seen one site show a item as 3M # which is supposed to be a 50 lids/liner, 20 caps but instead cut that in half. What that amounted to was either $ for a . Instruction manual. Charging • Press power button to turn unit on. • 1 click for external flashlight, 2 clicks for color cycle mode, 3 for blue, 4 for violet, 5 for turquoise, 6 for green, 7 for pink, 8 for cool white, and 9 clicks to turn off, or hold USB-A end into the USB port . Installing 3M™Paint Preparation System (PPS) 1. Weigh paint in the cup with liner according to paint manufacturer’s instructions before mixing product. 2. Mix product as needed. 3. Take the lid (with built in strainer) and snap onto the top of PPS cup. 4. Position locking collar onto the PPS cup and turn until tight. 5.
Color does not matter obviously. Usually Hard clear is the cheapest because no dye involved. Just take into consideration that it adds about 2 mil, or " to surface thickness (or " on a diameter). If you have some very tight fittings, you might need to ask them to mask it (shops will do it if asked). One (1) 3M™ PPS™ SUN GUN™ Color Matching Light ; One (1) 3M™ PPS™ SUN GUN™ Color Corrective Bulb, PN ; One (1) 3M™ PPS™ SUN GUN™ NiCad Battery Pack, PN ; One (1) 3M™ PPS™ SUN GUN™ Battery Charger w/ Power Supply Cord, PN ; One (1) Durable Protective Carrying Case ; One (1) Safety and Instruction Manual. 3M™ PPS™ Colour Check Light II PERSONAL SAFETY • Reusable Respirators • Reusable Coveralls • Nitrile Gloves with full face protection 3M™ Protective Coverall + 3M™ PPS™ Series Spray Cup System Kit Large ml, Standard ml, Midi ml, Mini ml 3M™ Professional Panel Wipes 3M™ Tack Cloth Aqua New 3M™ PPS™.
Installing 3M™ Paint Preparation System (PPS) 1. Weigh paint in the cup with liner according to paint manufacturer’s instructions before mixing product. 2. Mix product as needed. 3. Take the lid (with built in strainer) and snap onto the top of PPS cup. 4. Position locking collar onto the PPS cup and turn until tight. 5. To insert the 3M™ PPS™ Colour Check Light Battery into the 3M™ PPS™ Colour Check Light System, slide it into the end of the handle until it snaps securely into place. To remove the battery pack, depress the release buttons on each side together and then withdraw the battery from the light. Environmentally Responsible. Metamerism refers to the value of the colour difference between two samples under two different light sources and can make colour matching a difficult and frustrating task. The 3M PPS™ Colour Check Light II is designed to provide near daylight conditions for more accurate colour matching during paint work.
0コメント